£149.99
The Victron Energy Orion-Tr Smart 12/12-30A is a 360W non-isolated DC-DC charger for vehicle and marine dual-battery systems. It provides adaptive 30A charging from a starter battery and alternator to a 12V service battery and can be configured through the VictronConnect app.
The Victron Orion-Tr Smart 12/12-30A 360W Non-Isolated DC-DC Battery Charger is a compact, high-performance charger designed for modern 12V dual battery systems. It is commonly used in campervans, motorhomes, work vans, marine systems and off-grid vehicle setups where the starter battery and alternator are used to charge a leisure or service battery.
This model is non-isolated, making it suitable for systems where the input and output share a common negative/ground. Its compact design and 30A charging capability make it a popular choice for campervan electrical systems, particularly where reliable alternator charging is required while driving.
The Orion-Tr Smart uses an adaptive 3-stage charging algorithm: bulk, absorption and float. This helps charge the leisure battery properly and safely, supporting both lead-acid and lithium battery types when configured correctly.
Built-in Bluetooth allows the charger to be monitored, configured and updated using the VictronConnect app. This makes it easier to adjust charge settings, select battery profiles, monitor performance and configure the unit without needing additional display hardware.
The unit is compatible with smart alternator systems often found in modern Euro 5 and Euro 6 vehicles. Engine running detection helps control charging behaviour and reduces the risk of draining the starter battery when the engine is off.
The Orion-Tr Smart can also be used as a fixed-output DC power supply, making it a flexible electrical component for a wide range of 12V applications.
Model: Victron Orion-Tr Smart 12/12-30A Non-Isolated
SKU: ORI121236140
EAN: 8719076048954
Input Voltage Range: 8V to 17V
Nominal Input Voltage: 12V
Nominal Output Voltage: 12.2V
Output Voltage Adjustment Range: 10V to 15V
Continuous Output Current at 40°C: 30A
Maximum Output Current, 10 seconds: 40A
Short Circuit Output Current: 60A
Continuous Output Power at 25°C: 430W
Continuous Output Power at 40°C: 360W
Efficiency: 87%
No Load Input Current: Less than 80mA
Standby Current: Less than 1mA
Charging Algorithm: Adaptive 3-stage charge algorithm
Charge Stages: Bulk, absorption, float
Battery Compatibility: Lead-acid and lithium, subject to correct configuration
Bluetooth: Built-in Bluetooth Smart
App Compatibility: VictronConnect
Remote On/Off: Yes
Smart Alternator Compatibility: Yes
Engine Running Detection: Yes
DC Connection: Screw terminals
Maximum Cable Cross-Section: 16mm² / AWG6
Operating Temperature Range: -20°C to +55°C
Derating: 3% per °C above 40°C
Humidity: Maximum 95% non-condensing
Protection Category: IP43 electronic components / IP22 connection area
Dimensions: 130mm height x 186mm width x 80mm depth
Weight: 1.8kg
Installation Type: Fixed electrical installation
Victron Orion-Tr Smart 12/12-30A 360W Non-Isolated DC-DC Battery Charger
This product is designed for installation in 12V dual battery systems where a starter battery and alternator charge a leisure or service battery.
The non-isolated model is intended for electrical systems with a shared/common negative. If the installation requires galvanic isolation between input and output, an isolated Orion-Tr Smart model may be more appropriate.
Professional installation is recommended, especially in campervan, motorhome, marine or work vehicle electrical systems. Correct cable sizing, fusing, ventilation, mounting orientation and configuration are essential for safe operation.
Battery type and charging settings should be configured correctly in the VictronConnect app before use. Lithium battery installations may require additional battery management system considerations depending on the battery manufacturer’s requirements.